Burkert Type S030 Flow Sensor Connector | 00423980 00423981 00423982

The Type S030 Series flow sensor connectors (fitting) by Chengyuan Hydraulic are high-precision fluid measuring components engineered to match the technical benchmarks of Burkert. This series covers a full range of specific part numbers including 00423980, 00423981, 00423982, 00423983, and 00423984.

Utilizing a paddle-wheel measurement principle, the S030 fitting houses an internal rotor with permanent magnets that transmit signals to an external transmitter through a non-contact interface. Chengyuan ensures 100% original-place interchangeability regarding mechanical dimensions, threading, and chemical resistance. Each unit undergoes 100% simulated operational testing for seal integrity and signal consistency, providing a long-lasting, reliable solution for water treatment, chemical dosing, and industrial fluid loops.

Technical Specifications :

• Brand Compatibility: Burkert Type S030 Fitting Replacement

• Part Number Matrix: 00423980, 00423981, 00423982, 00423983, 00423984

• Measuring Principle: Paddle Wheel (Turbine)

• Pipe Diameter (DN): DN 15 to DN 50

• Body Materials: Available in PVC, PP, PVDF, or Stainless Steel (316L)

• Sealing Material: FKM or EPDM options

• Measurement Accuracy: $\le \pm 0.5\%$ (Full Scale, after field calibration)

• Repeatability: $\le 0.4\%$

• Max Operating Pressure: PN 10 (Plastic) / PN 16 (Metal)

• Media Temperature Range: PVC (0°C to +50°C), PVDF (-15°C to +115°C), Stainless Steel (-15°C to +125°C)

• Ingress Protection: IP65 / IP67 (When transmitter is installed)

Key Technical Advantages:

• Non-Contact Signal Induction: High-strength permanent magnets embedded in the rotor transfer data to the transmitter via inductive coupling. This “contactless” design eliminates the risk of circuit moisture intrusion caused by seal fatigue, ensuring stable signal transmission.

• Low-Friction Ceramic Bearing System: The rotor axle is made from high-hardness ceramic or specialized alloys, precision-ground to lower the startup flow threshold. This maintains high linearity even at low flow velocities.

• Precision-Molded Sealing Interface: The S030-to-transmitter connection is injection-molded using high-precision dies to ensure a perfect fit. Paired with high-performance FKM O-rings, it effectively resists chemical corrosion and high-pressure pulses.

• Modular Bayonet Design: Featuring a standard bayonet-style mounting system. Users can quickly replace or clean the internal rotor without dismantling the piping, significantly reducing maintenance downtime.

Application Areas:

• Water Treatment: Pure water preparation and cooling water circulation monitoring.

• Chemical Production: Precise dosing and flow control for acids, alkalis, and corrosive fluids.

• Clean-In-Place (CIP): Monitoring cleaning flows and signal feedback in food and pharmaceutical industries.

Expert Maintenance Tips:

• Straight Pipe Section Requirement: To ensure accuracy, maintain at least 10x DN upstream and 3x DN downstream of straight piping. Ensure the pipe is always completely filled with fluid.

• Debris Protection: If the medium contains solid particles, a strainer (min. 100 mesh) must be installed upstream to prevent rotor jamming or axle fracture.

• Seal Lubrication: When installing the transmitter (e.g., Type 8030/8035) into the S030 fitting, apply a small amount of silicone grease to the O-ring to prevent distortion or failure during installation.