Burkert Series Solenoid Valve | 423985 00052344 163415 134438 | High Pressure Fluid Control

The Burkert Series industrial solenoid valves from Chengyuan Hydraulic are premium fluid control components fully compatible with Burkert official engineering standards. This range covers a wide spectrum of specifications, from direct-acting compact valves to servo-assisted large-bore models (e.g., 423985, 00052344, 163415). Our products focus on precise switching and long-term sealing in high-pressure environments. Featuring seal structures identical to the original design, they effectively eliminate medium leakage and response delays in industrial automation systems. Every valve undergoes 100% simulated load and leak testing before delivery, ensuring 100% original-place interchangeability.

Technical Specifications :

• Core Order Codes: 423985, 00052344, 163415, 00221630, 134438, 00246310

• Corresponding Burkert Types: Type 6013, Type 6213, Type 0330 (specific to code)

• Port Sizes: G 1/4″, G 1/2″, NPT 1/4″, etc.

• Orifice (DN): 2.0 mm to 20.0 mm

• Rated Operating Pressure: Up to 25 bar (model dependent)

• Body Materials: Stainless Steel (316L) or Premium Brass

• Sealing Materials: FKM (Viton) / EPDM / NBR

• Control Voltages: 24V DC, 230V AC (with rectifier plug)

• Duty Cycle: 100% ED (Continuous Duty)

Key Technical Advantages:

• Precision Armature & Extended Cycle Life: The armature assembly is crafted from specialized stainless steel, precision-ground, and paired with wear-resistant guide tubes. This ensures superior dynamic response and seal tightness even after millions of high-frequency cycles.

• High-Performance FKM Sealing: Utilizing imported Fluorocarbon (FKM) for primary seals provides excellent chemical resistance and high-temperature stability. Whether handling hot oils, steam, or neutral chemicals, the seal remains robust against leakage.

• Vibration-Proof & Encapsulated Coils: Solenoid coils are vacuum-molded for superior heat dissipation and vibration resistance, rated to IP65. This guarantees that electrical systems will not fail due to insulation aging in vibrating or humid industrial environments.

• Low Power Consumption & Rapid Response: Optimized magnetic circuit designs provide strong suction while significantly reducing operational power draw. Millisecond switching times enhance the accuracy of automated production line controls.

Application Areas:

• Hydraulic & Pneumatic Systems: Acting as pilot valves or directional controls for actuators.

• Injection Molding: Precise fluid switching for cooling circuits or auxiliary functions.

• Water Treatment & Fine Chemical: Media control in laboratory analysis equipment and automated chemical processing.

Expert Maintenance Tips:

• Media Filtration: To extend seat life, we recommend installing a filter of at least 100μm upstream of the valve.

• Mounting Orientation: For servo-assisted models like Type 6213, vertical upright mounting is advised to minimize plunger sticking caused by sediment in the medium.

• Electrical Surge Protection: When used in outdoor environments, it is recommended to use cable plugs with surge protection to prevent coil burnout from induced lightning strikes.