Burkert 6013 2/2-Way Direct-acting Solenoid Valve | 00227411 00417692 00351112

The 6013 Series direct-acting plunger valves from Chengyuan Hydraulic are high-performance 2/2-way components fully compatible with Burkert industrial standards. Characterized by a compact direct-acting structure, these valves do not require differential pressure to operate, making them ideal for vacuum, lubricating oils, and neutral fluids. For core part numbers including 00227411 (G 1/4), 00417692 (Stainless Steel), and 00351112 (Brass), we utilize high-permeability solenoid tubes and fatigue-resistant springs. Every valve undergoes 100% simulated high-frequency operation testing before shipment to ensure no sticking and zero leakage in demanding cycles, guaranteeing 100% original-place interchangeability.

Technical Specifications :

• Series Model: Burkert Type 6013 (Type A Structure)

• Circuit Function: 2/2-Way / Normally Closed (NC)

• Orifice Size (DN): 2.0 mm to 6.0 mm (Depending on model)

• Operating Pressure: 0 – 25 bar (Orifice & coil dependent)

• Body Material: Brass or Stainless Steel (1.4305)

• Seal Material: FKM (Viton) standard for chemical resistance

• Power Consumption: 8W (Small) / 10W (Standard)

• Standard Voltages: $24V DC$, $230V AC$

• Temperature Range: $-10°C$ to $+55°C$ ambient

• Connection Port: G 1/8 or G 1/4 Thread

Key Technical Advantages:

• Zero Differential Pressure Switching: Unlike pilot-operated valves, the 6013 series relies solely on electromagnetic force to lift the plunger. It ensures 100% reliable opening even in gravity-fed or low-pressure systems where other valves might fail.

• Laser-Welded Solenoid Tube: The guide tube is joined to the seat via advanced laser welding. This increases pressure resistance and vibration durability compared to threaded joints, eliminating potential external leakage over years of operation.

• Wear-Resistant Plunger Design: The plunger surface is treated with low-friction coatings to minimize mechanical wear. This reduces particulate generation in automated lines, protecting system cleanliness and extending seal lifespan.

• Broad Operating Range: Optimized magnetic field simulation allows this model to maintain stable performance from -10 bar (vacuum) up to 25 bar, making it a versatile choice for both lab instruments and heavy industrial automation.

Application Areas:

• Pneumatic Automation: Pilot control for larger valves or direct driving of small actuators.

• Analytical Instruments: Fluid shut-off in laboratory equipment for neutral gases and liquids.

• Cooling Systems: Circulation control for laser cooling units or injection molding machines.

• Combustion Control: Safety shut-off for industrial gas burners.

Expert Maintenance Tips:

• Mounting Orientation: While direct-acting valves are flexible in mounting, it is recommended to install the solenoid vertically to prevent debris from settling in the plunger cavity.

• Voltage Regulation: Maintain power fluctuations within $\pm 10\%$. Excessive voltage causes coil overheating, while low voltage may prevent suction under pressurized conditions.

• Filtration Standard: Although the direct-acting design is debris-tolerant, a $50\mu m$ upstream filter is recommended to prevent large particles from damaging the FKM sealing face.